Efisiensi Efisiensi Kinerja Pekerja Penggunaan Galah Bahan Karbon dan Aluminium
Worker Performance Efficiency Using Carbon and Aluminum Poles
Abstract
Harvesting is the activity of picking fresh fruit bunches from trees, collecting loose fruits, as well as gathering and transporting the fruits to a collection point (TPH) to be taken to the palm oil mill (PKS). The tools used in this harvesting process are poles made of carbon and aluminum. Carbon composite is a material that uses carbon fibers, which are strong and lightweight, though expensive. Aluminum is a metal with low strength and soft properties. This research uses a descriptive method with primary data collection directly from the field. The results show that the use of carbon and aluminum poles varies based on age (young <35 years, old >35 years). For young harvesters using carbon poles, the average workload is 20.84%, productivity is 37.25 bunches/hour, and efficiency is 95.60%. For young harvesters using aluminum poles, the average workload is 22.75%, productivity is 30.56 bunches/hour, and efficiency is 94.40%. For older harvesters using carbon poles, the average workload is 23.67%, productivity is 35.38 bunches/hour, and efficiency is 94.32%. For older harvesters using aluminum poles, the average workload is 27.22%, productivity is 28.99 bunches/hour, and efficiency is 92.57%.
References
Apriyanto, Y., Sayekti, A. A. S., & Trimerani, R. (2023). Analisis Faktor-Faktor Yang Mempengaruhi Kinerja Karyawan Panen Pada PT. Menthobi Sawit Jaya Di Kabupaten Seruyan Kalimantan Tengah. Agroforetech, 1(3), 1653–1658. Retrieved from https://jurnal.instiperjogja.ac.id/index.php/JOM/article/view/869
Asmara, S., Kano, F. I., Kadir, M. Z., & Suharyatun, S. (2023). Unjuk Kerja Alat Pemotong Pelepah Sawit Tipe Egrek Secara Manual dan Mekanis Menggunakan Mesin Husqvarna 327 LDx Performance Test Of Palm Frond Cutter Sickle Type Manually And Mechanically With Husqvarna Machine 3. Jurnal Agrikultural, 2(1), 144–150.
Batubara, R. S. (2021). Analisis Terhadap Alat Pemanen Sawit (Egrek) Di PT. PerkebunanNusantara IV Kebun Mayang. TALENTA Conference Series: Energy and Engineering, 4(1), 247–252. https://doi.org/10.32734/ee.v4i1.1281
Derisman, A., Sarmidi, & Zikri. (2022). EFISIENSI KERJA WHEEL LOADER KOMATSU WA 200-5 DI PABRIK BRIKET TANJUNG ENIM PT. BUKIT ASAM Tb. Jurnal Surya Teknika, 9(1), 360–364. https://doi.org/10.37859/jst.v9i1.3797
Dianto, F., Efendi, D., & Wachjar, A. (2017). Pengelolaan Panen Kelapa Sawit (Elaeis guineensis Jacq.) Pelantaran Agro Estate, Kota Waringin Timur, Kalimantan Tengah. Buletin Agrohorti, 5(3), 410–417. https://doi.org/10.29244/agrob.v5i3.19574
Eko Aprianto Nugroho, & Abdul Rahman Agung Ramadhan. (2024). Proses Pembuatan Lower Mounting Cyilinder Dengan Material S45C Di Cv. Sutechindo Jaya Presisi. Jurnal Teknik Dan Science, 3(2), 43–48. https://doi.org/10.56127/jts.v3i2.1437
Mardhani, D. Y. (2021). ( Study of the Relationship Between Rain and Palm Oil Production. Jurnal Agribisnis Indonesia, 8(1), 17–32.
Mariadi, G., & Faizin, R. (2022). Pengaruh Tenaga Panen Terhadap Produktivitas Guna Peningkatan Produksi Kelapa Sawit Di Pt. Agro Sinergi Nusantara (a.S.N). Jurnal Agrisep, 23(1), 9–17. https://doi.org/10.17969/agrisep.v23i1.26236
Ningsih, N. (2023). Analisis Faktor yang Mempengaruhi Produktivitas Pemanen Kelapa Sawit : Literature Review. Analisis Faktor Yang Mempengaruhi (Nurafrillia Ningsih) Madani: Jurnal Ilmiah Multidisiplin, 1(5), 2986–6340.
Nugroho, D. A., Kurniawati, F., & Ambarsari, A. (2023). Kajian Penerapan Standar Operasional Prosedur (Sop) PADA Kegiatan Panen Dan Muat Tbs Di PT Sewangi Sejati Luhur, Kecamatan Tapung Hulu, Kabupaten Kampar. Jurnal Agroforetech, 1(3), 1733–1741.
Pandiangan, Y., Rizal, A., & Harahap, S. (2023). Studi Komparatif Panen Kelapa Sawit Menggunakan Dodos Mekanis Dan Dodos Manual. Agribios, 21(2), 199–206.
Robiansyah, K., & Irfai, M. A. (2021). Pengaruh Orientasi Arah Serat Terhadap Kekuatan Tarik dan kekuatan Bending Komposit Berpenguat Serat Karbon dengan Matrix Epoxy. Jtm, 09(03), 47–52.
Zikrullah, J., & Putra, G. (2022). Pengukuran Beban Kerja Operator Menggunakan Metode 10 Denyut di PT. Wirataco Mitra Mulia. Serambi Engineering, 7(2), 2976–2982.
Zulfiar, M. H., Ekoprasetyo, Y., & Jayady, A. (2021). ANALISIS PRODUKTIFITAS KERJA DENGAN TIME STUDY METHOD (Studi Kasus : Proyek Pembangunan Gedung Student Dormitory Universitas Muhammadiyah Yogyakarta). Jurnal Karkasa, 7(1), 15–21.
