Application of HACCP in Wheat Flour Milling Process In PT. XYZ

  • Chairunnisa Putri Andini Universitas Jenderal Soedirman

Abstract

The implementation of HACCP (Hazard Analysis Critical Control Point) in PT. XYZ is carried out to prevent obstacles during the production process and increase consumer trust. PT. XYZ is a company engaged in the production of wheat flour to food and non-food products made from wheat. In the wheat flour production process, it goes through several important processes to produce products that meet the standards. The wheat flour production process passes through cleaning and milling which uses various types of equipment. The use of this equipment needs good monitoring and maintenance to be able to work and produce quality products that are trusted by consumers. So, to achieve this, an analysis was carried out which aims to determine the application of HACCP in the wheat flour production process in PT. XYZ. The analysis methods used were interviews, observation, and active participation in the production process in PT. XYZ. In the analysis of the application of HACCP in PT. XYZ, it was found that in the wheat flour production process there were no CCP (Critical Control Point) hazards that had a significant effect, but there were OPRP (Operational Pre Requisite Program) and PRP (Pre Requisite Program) hazards on several production machines used.

References

Canti, M., Fransiska, I., & Lestari, D. (2020). Karakteristik Mi Kering Substitusi Tepung Terigu dengan Tepung Labu Kuning dan Tepung Ikan Tuna. Jurnal Aplikasi Teknologi Pangan, 9(4), 181–187. https://doi.org/10.17728/jatp.6801

Citraresmi, A. D. P., & Putri, F. P. (2019). Penerapan hazard analysis and critical control point (haccp) pada proses produksi wafer roll. Jurnal Teknologi & Industri Hasil Pertanian, 24(1), 1. https://doi.org/10.23960/jtihp.v24i1.1-14

Dewanti, R. dan Hariyadi. (2013). HACCP : Pendekatan Sistematik Pengendalian Keamanan Pangan. Jakarta: Dian Rakyat.

Istinganah, M., Rauf, R., & Widyaningsih, E. N. (2017). Tingkat Kekerasan dan Daya Terima Biskuit dari Campuran Tepung Jagung dan Tepung Terigu dengan Volume Air yang Proporsional. Jurnal Kesehatan, 10(2), 83. https://doi.org/10.23917/jurkes.v10i2.5537

Lala, F. ., Susilo, B., & Komar, N. (2013). Uji Karakteristik Mie Instan Berbahan-Baku Tepung Terigu dengan Substitusi Mocaf Characteristics Test of Instant Noodles Made from Wheat Flour with Mocaf Substitution. Jurnal Bioproses Komoditas Tropis, 1(2), 11–20.

Liu, F., Rhim, H., Park, K., Xu, J., & Lo, C. K. Y. (2021). HACCP certification in food industry: Trade-offs in product safety and firm performance. International Journal of Production Economics, 231(2021), 1–12. https://doi.org/10.1016/j.ijpe.2020.107838

Mahirdini, S., & Afifah, D. N. (2016). Pengaruh substitusi tepung terigu dengan tepung porang (amorphophallus oncopphyllus) terhadap kadar protein, serat pangan, lemak, dan tingkat penerimaan biskuit. Jurnal Gizi Indonesia (The Indonesian Journal of Nutrition), 5(1), 42–49. https://doi.org/10.14710/jgi.5.1.42-49

Nandari, D., Singapurwa, N. M. A. S., Semariyani, A. A. M., Candra, I. P., & Rudianta, I. N. (2019). Penerapan HACCP (Hazard Analysis Critical Control Point) menu chiken butter untuk maskapai penerbangan JQdi PT AF. Gema Agro, 24(02), 134–140.

Prayitno, S. A., & Tjiptaningdyah, R. (2018). Penerapan 12 tahapan hazard analysis and critical control point (haccp) sebagai sistem keamanan pangan berbasis produk perikanan. Jurnal Agrica, 11(2), 79–92. https://doi.org/10.31289/agrica.v11i2.1808.g1681

Shuvo, S. Das, Josy, M. S. K., Parvin, R., Zahid, M. A., Paul, D. K., & Elahi, M. T. (2019). Development of a HACCP-based approach to control risk factors associated with biscuit manufacturing plant, Bangladesh. Nutrition and Food Science, 49(6), 1180–1194. https://doi.org/10.1108/NFS-03-2019-0074

Wahyuningtias, D., Putranto, T. S., & Kusdiana, R. N. (2014). Uji Kesukaan Hasil Jadi Kue Brownies Menggunakan Tepung Terigu dan Tepung Gandum Utuh. Binus Business Review, 5(1), 57. https://doi.org/10.21512/bbr.v5i1.1196

Yasinta, U. (2017). Pengaruh Subtitusi Tepung Terigu Dengan Tepung Pisang Terhadap Sifat Fisikokimia Dan Organoleptik Cookies. Jurnal Aplikasi Teknologi Pangan, 6(3), 119–123. https://doi.org/10.17728/jatp.200

Yin, L. Bin, He, P., Liu, Y. L., & Li, L. Le. (2020). Application of hazard analysis critical control point in liquor production. IOP Conference Series: Earth and Environmental Science, 559(2020), 1–7. https://doi.org/10.1088/1755-1315/559/1/012017
Published
2024-12-26
How to Cite
ANDINI, Chairunnisa Putri. Application of HACCP in Wheat Flour Milling Process In PT. XYZ. Indonesian Journal of Food Technology, [S.l.], v. 3, n. 2, p. 154-166, dec. 2024. ISSN 2962-6641. Available at: <https://jos.unsoed.ac.id/index.php/ijft/article/view/9163>. Date accessed: 31 mar. 2025. doi: https://doi.org/10.20884/1.ijft.2024.3.2.9163.